manualshive.com logo in svg

Nortel Meridian M1250, User Manual

Share
Download
Nortel Meridian M1250 User Manual Download Page 130

• • • • 124 • • • •

Convenience features

Enhanced Secrecy

The Enhanced Secrecy feature ensures that either the caller or the called party is always excluded from 
the call when you are talking to the other party.

1

Dial the requested 
extension.

The excl. src. indicator 
goes on during dialing. 
You hear ringing. The LCD 
indicator flashes slowly.

2

When the called party 
answers, the D indicator 
goes on steadily. The 
caller cannot hear 
conversation between 
you and the called party. 
Press the lpk key beside 
the slowly flashing S 
indicator to establish a 
three-way connection.

You, the caller, and the 
called party hear a 
warning tone.

3a

Press RLS or an idle lpk 
key to release the call 
from the console. You 
cannot reenter the call.

The caller and the called 
party remain connected. 
The RLS indicator goes 
on. All other indicators go 
off.

Summary of Contents for Meridian M1250









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands