Page 92 of 150
Installation and configuration
P0914209
Standard 3.00
April 2000
Figure 39
SET ESAM: PHONE PARAMETERS screen
5
XUT Parameters
- This variation of the
SET ESAM
command
allows the user to change the XUT parameters. Its display is similar to
Figure 40.
Figure 40
SET ESAM: PHONE PARAMETERS: XUT PARAMETERS screen
a
Companding - This variation of the
SET ESAM:XUT
PARAMETERS
command allows the user to change the companding
setting. The default setting is uLaw. Its display is similar to Figure
41.
Enter Phone Port (0-15)
Enter <cr> when done - 1
Provision Phone Port 1 (YES or NO) Y
Enable Auto Hold (YES or NO) Y
Enable Do Not Disturb (YES or NO) N
Transfer Key [Current Value - 3] - 3
DN [Current Value - 6400] - 6400
Enter Phone Port (1-16)
Enter <cr> when done -
ESAM Setup Menu:
1 - System Parameters
2 - Show Slot Parameters
3 - Set Slot Parameters
4 - Phone Parameters
5 - XUT Parameters
6 - Trunk Parameters
8 - Quit (No Save)
9 - End (Save)
XUT Setup Menu for XUT
1 - Companding
2 - 10PPS1 Make/Break Ratio
3 - 10PPS2 Make/Break Ratio
4 - 20PPS Make/Break Ratio
9 - Return To Main Menu
