Installation and configuration
Page 79 of 150
Mini-Carrier Remote
Description, Installation, and Maintenance
•
HELP (HE)
•
HOST (HOS)
•
SET (S)
•
TEST (T)
•
QUIT (Q)
An in-depth discussion of these commands follows, along with an example of
the on-screen response generated by each. Our discussion will begin with the
HELP
command, which generates a listing of the 9 basic commands:
HELP (HE, ?)
If you enter
?,
MMI will list available commands along with an explanation
of their usage. The help screen can be made to appear by entering
?, HE,
or HELP.
Entering any of these commands causes a screen similar to the
following to appear:
Figure 12
HELP (H) screen
ALARM [ENABLE (A E) | DISABLE (A D)]
ALARM ENABLE (A E)
This command allows MCR to activate system alarm relay output to respond
to any active alarm condition.
MCR::>he
ALARM USAGE: Alarm [Enable | Disable]
CLEAR USAGE: Clear [Alarm | Error | Alarm Log | Memory] [Dist]
DISPLAY USAGE: Disp [Alarm | Config | Status | Perf | Hist | Map] [Dist]
ESAM USAGE: Esam [Force | Never | Auto]
HELP USAGE: HElp | ?
HOST USAGE: HOSt (@@@ to Terminate)
SET USAGE: Set [Time | Date | Alarm | Config | Name | Esam | Span]
TEST USAGE: Test [Verbose] [Distant]
QUIT USAGE: Quit
Notation Used:
CAPS - Required Letters [] - Optional | - Either/Or
