Nortel ISDN Signaling Link, Description, Installation And Operation

Page: 315 / 380

Maintenance Page 315 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Table 53
DSP commands
Command Description
DSPReset DSP Number Reset the indicated DSP.
Example:
ITG>DSPReset 0
DSPSelfTest DSP Number Run self-test on the DSP.
Example: ITG>DSPSelfTest 0
DSPNumShow Print number of DSPs on ITG card.
Example: ITG>DSPNumShow
DSPPcmLpbkTestOn Start PCM loopback test on the indicated DSP.
Example:
ITG>DSPPcmLpbkTestOn
DSPPcmLpbkTestOff Stop PCM loopback test on the indicated DSP.
Example: ITG> DSPPcmLpbkTestOff
DSPSndLpbkTestOn Start Send loopback test on the indicated DSP.
Example: ITG> DSPSndLpbkTestOn
DSPSndLpbkTestOff Stop Send loopback test on the indicated DSP.
Example:
ITG> DSPSndLpbkTestOff
DSPRcvLpbkTestOn Start Receive loopback test on the indicated DSP.
Example: ITG> DSPRcvLpbkTestOn
DSPRcvLpbkTestOff Stop Receive loopback test on the indicated DSP.
Example: ITG> DSPRcvLpbkTestOff