Nortel ISDN Signaling Link, Description, Installation And Operation

Page: 290 / 380

Page 290 of 378 OA&M using the ITG shell CLI and overlays
553-3001-202 Standard 1.00 April 2000
• “Display ITG card port status” on page 293.
Table 43 shows a summary of the Meridian 1 system administration
commands available in overlay 32.
Table 43
Overlay 32 - ITG maintenance commands
Command Function
DISC l s c Disable the indicated card,
where: l = loop, s = shelf, c = card
DISI l s c Disable the indicated card when
idle, where: l = loop, s = shelf,
c = card
Note: you should use the DISI
command to disable the ITG card
instead of the DISC command. The
disablement of the ITG card is
indicated by the NPR011 message.
DISU l s c u Disable the indicated unit,
where: l = loop, s = shelf,
c = card, u = unit
ENLC l s c Enable the described card,
where: l = loop, s = shelf,
c = card
ENLU l s c u Enable the described unit,
where: l = loop, s = shelf,
c = card, u = unit
IDC l s c Print the Card ID information for the
described card,
where: l = loop, s = shelf,
c = card