Nortel ISDN Signaling Link, Description, Installation And Operation

Page: 314 / 380

Page 314 of 378 Maintenance
553-3001-202 Standard 1.00 April 2000
NVRGWSet IP gateway Set the default gateway address in NVRAM.
Example: ITG> NVRRGWSet “47.0.0.1”
NVRSMSet subnet mask Set the subnet mask in NVRAM.
Example: ITG> NVRRSMSet “255.255.240.0”
NVRIPShow Print the values of the IP parameters that exist in NVRAM.
Example:
ITG> NVRIPShow
nvramLeaderSet Set the leader bit in NVRAM.
Example: ITG> nvramLeaderSet
nvramLeaderClr Clear the leader bit in NVRAM, but does not erase the IP
parameters in NVRAM.
Example: ITG> nvramLeaderClr
NVRClear Clear IP parameters in NVRAM.
Example: ITG> NVRClear
setLeader IP address, IP
gateway, subnet mask The one command that does all the necessary actions to make
a Leader. Sets IP address, gateway, subnet mask, boot method
to static, and Leader bit in NVRAM.
Example: ITG> setLeader “47.23.45.67”, “47.0.0.1”, “255.255.240.0”
clearLeader The one command that does all the necessary actions to clear
the Leader information in NVRAM and set the boot method to
use bootp, thus, making the card a Follower.
Example:
ITG> clearLeader
Table 52
NVRAM IP configuration commands (Part 2 of 2)
Command Description