Nortel ISDN Signaling Link, Description, Installation And Operation

Page: 311 / 380

Maintenance Page 311 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Table 51
File transfer commands (Part 1 of 3)
Command Description
swDownload hostname,
username, password,
directory path, filename Update the software on the ITG card with the binary file
received from an FTP server corresponding to the
hostname IP
address. The ITG card FTP client performs a get which
downloads the file to the ITG flash bank. A checksum is
calculated to check correct delivery. Once the new software
version is successfully downloaded, the ITG card must be
rebooted with cardReset in order to run the new software.
Hostname refers to either the IP address of the FTP host, or the
ITG card itself or another ITG card when a PC card in the A:
drive of the ITG card contains the software binary file.
Example: ITG> swDownload “47.82.32.246”, “anonymous”, “guest”,
“/software”, “vxWorks.mms”
DPTableGet hostname,
username, password,
directory path, filename
Update the address table on the ITG card with the address table
file on the indicated host, account, and path. The ITG host
starts an FTP session with the given parameters and
downloads the file to the flash file system.
Example: ITG> DPTableGet “ngals042”, “anonymous”, “guest”,
“/dialPlan”, “dialingPlan.txt”
configFileGet hostname,
username, password,
directory path, filename
Update the config.ini file on the ITG card with the config.ini file
on the indicated host, account, and path. The configFileGet task
on the ITG host starts an FTP session with the given
parameters and downloads the file to the flash file system.
Example: ITG> ConfigFileGet “ngals042”, “anonymous”, “guest”,
“/configDir”, “config.ini”
bootPFileGet hostname,
username, password,
directory path, filename
Update the bootptab file on the ITG card with the bootptab file
on the indicated host, account, and path. The bootpFileGet task
on the ITG host starts an FTP session with the given
parameters and downloads the file to the flash file system.
Example: ITG> bootpFileGet “ngals042”, “anonymous”, “guest”,
“/bootpDir”, “bootptab”