Digital Telephone IP Adapter Installation and Administration Guide
69
June 2005
Configuring the IP Adapter unit using the telephone menu
8
The telephone display asks if you want to modify the SPRE code that you
must dial to go online manually, similar to the following:
Modify Online SPRE?
[1-Yes 2-No]
IF you want to
THEN do the following:
modify the
number that you
must dial to go
online with the
Digital Telephone
IP Adapter
unit
in
the absence of an
online command
in the Online/
Offline Table,
1 Press
1
.
2 Press the
Hold
key.
Result:
The telephone display prompts you for a
new online SPRE code. The telephone display also
shows the current online SPRE code, similar to the
following:
Enter Online SPRE
#99
3 Press the digits of the new online SPRE code.
Note:
All SPRE codes begin with a pound sign (#).
It is not necessary to press the
#
key when
modifying a SPRE code. However, when you
actually use a SPRE code, you
must
press the
#
key
for the host PBX to recognize the digits as a SPRE
code.
4 Press the
Hold
key.
5 Proceed to step 9 on page 70.
retain the current
online SPRE
code,
1 Press
2
.
2 Press the
Hold
key.
