Digital Telephone IP Adapter Installation and Administration Guide
83
June 2005
Configuring the IP Adapter unit using the telephone menu
18
The telephone display asks if you want to save the configuration you have
just entered, similar to the following:
Save Configuration?
[1-Yes 2-No]
modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit,
(continued)
6 If this is not the correct model number of your
telephone set, press
2
and return to step 5, above.
7 If this is the correct model number of your telephone
set, press
1
.
8 Press the
Hold
key.
9 Proceed to step 18, below.
not modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit,
1 Press
1
.
2 Press the
Hold
key.
IF you want to
THEN do the following:
discard your most
recent
configuration
changes,
1 Press
2
.
2 Press the
Hold
key.
Result:
The telephone display asks if you want to
reboot the Digital Telephone IP Adapter unit, similar
to the following:
Reboot Unit?
[1-Yes 2-No]
3 Proceed to step 19 on page 84.
IF you want to
THEN do the following:
