Digital Telephone IP Adapter Installation and Administration Guide
67
June 2005
Configuring the IP Adapter unit using the telephone menu
IF you want to
THEN do the following:
modify the Digital
Telephone IP
Adapter
unit’s
current time offset
between the host
site and the
remote site,
1 Press
1
.
2 Press the
Hold
key.
Result:
The telephone display prompts you to
indicate if the time at the remote site is later or
earlier than the time at the host site, similar to the
following:
Enter Sign [1-Add 2 -Sub]
3 Press
1
if the time at the remote site is later than the
time at the host site. This is the case when the
remote site is located east of the host site.
4 Press
2
if the time at the remote site is earlier than
the time at the host site. This is the case when the
remote site is located west of the host site.
5 Press the
Hold
key.
Result:
The telephone display prompts you for the
number of minutes in the time offset. The telephone
display also shows the current time offset, similar to
the following:
Enter Offset in Minutes
0
6 Enter the number of minutes of the time offset. For
example, if the time offset is 2 hours, press
1
,
2
,
and
0
(for 120 minutes)
.
7 Press the
Hold
key.
8 Proceed to step 8 on page 69.
