76
Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu
Standard 3.0
not enable
prioritizing of
voice packets in
the IP header,
1 Press
2
.
2 Press the
Hold
key.
Result:
The telephone display asks if you want to
enable 802.1Q Mapping, similar to the following:
Enable 802.1Q Mapping?
[1-Yes 2-No]
enable prioritizing
of voice packets in
the IEEE Media
Access Control
layer (802.1Q),
1 Press
1
.
2 Press the
Hold
key.
Result:
The telephone display prompts you for the
VLAN ID, similar to the following:
VLAN ID [0-4094] 0=NC:
0
3 Enter the Virtual Local Area Network (VLAN) ID
for 802.1Q Mapping.
Valid entries are 0 (0 = Not Configured) through
4094 (0xFFE). The default is 0.
4 Press the
Hold
key.
Result:
The telephone display prompts you for the
802.1Q priority value, similar to the following:
802.1Q Priority [0-7]
5
5 Enter the priority value for 802.1Q Mapping.
Valid entries are 0 through 7. The default is 6.
6 Press the
Hold
key.
Result:
The telephone display prompts you for the
DiffServ CodePoint value, similar to the following:
DiffServ CodePoint Val:
EF
IF you want to
THEN do the following:
