Nortel CallPilot 150, Installation And Maintenance Manual

Page: 89 / 94

Glossary 89
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
RS-232 terminal
A device with a display, such as a computer or a laptop, that you can connect to the serial
port of the CallPilot Mini/CallPilot 150.
Serial cable
A cable that transfers data one bit at a time. This cable connects the CallPilot Mini/
CallPilot 150 to an RS232 terminal.
Serial port
A port that sends and receives data one bit at a time. This port is used to connect the
CallPilot Mini/CallPilot 150 to an RS-232 terminal.
System administrator
The person who is responsible for setting up and configuring CallPilot.
TCM port
Time Compression Multiplexing port. This is the type of port that you use to connect the
CallPilot 150 to the Norstar KSU or the CallPilot Mini to the Meridian 1 PBX.
Tone dial telephone
A push button telephone that emits DTMF tones.
Transmission Control Protocol/Internet Protocol (TCP/IP)
A language governing communication among all computers on the Internet.
Voice channel
A communication path that CallPilot uses to send voice messages to and from the Norstar
KSU or Meridian 1 PBX. There are two voice channels on each TCM port.
Voice prompts
The prerecorded voice instructions that play when accessing the different CallPilot
features and options. Voice prompts also enable a caller to proceed along the call path of a
CCR Tree.
Wide Area Network (WAN)
A collection of computers connected or networked to each other over long distances,
typically using common carrier facilities.