Nortel CallPilot 150, Installation And Maintenance Manual

Page: 22 / 94

22 Chapter 3 Preparing to install the CallPilot Mini/CallPilot 150
P0990474 0
3
Managing the CallPilot system
CallPilot Mini is managed using CallPilot Manager. You require a LAN connection to the
CallPilot Mini to use CallPilot Manager.
CallPilot 150 is managed using a telephone or CallPilot Manager, depending on whether the
CallPilot 150 has a LAN connection.
Running without a LAN
A LAN connection is optional for a basic CallPilot 150 system running on a Norstar system. When
there is no LAN connection, you can administer the system through a telephone using the
≤·°‹
menus.
Using a LAN
When there is a LAN connection, CallPilot Mini/CallPilot 150 is managed through a web browser
interface called CallPilot Manager.
To use CallPilot Manager, the CallPilot Mini/CallPilot 150 system must have a fixed IP address.
All CallPilot Mini/CallPilot 150s are shipped with the default IP address of 192.168.110.10. If this
IP address conflicts with your network, you must change the address before connecting the
CallPilot Mini/CallPilot 150 to your network. You can change the IP address using a terminal
connected to the CallPilot Mini/CallPilot 150 serial port, or through a temporary Ethernet
connection using an Ethernet crossover cable to a stand alone computer or laptop.
Detailed instructions for setting the IP address and accessing CallPilot Manager are provided in
“Initializing the CallPilot Mini/CallPilot 150” on page 29 .
DNS server
Your LAN does not require a DNS server for CallPilot Mini/CallPilot 150 to operate. However, a
DNS server provides an easier interface to accessing the CallPilot Manager URL by providing a
language-based name, such as CallPilot01. After this name is added to the DNS server as an alias
for the system IP address, users can start CallPilot Manager by entering this name.
Note:
You cannot use the CallPilot Mini without a LAN connection.
You require a LAN connection to print reports, administer the Networking feature, use the
Backup and Restore Utility and use the Language Configuration Utility.