Nortel CallPilot 150, Installation And Maintenance Manual

Page: 35 / 94

Chapter 5 Initializing the CallPilot Mini/CallPilot 150 35
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
Connecting to the CallPilot Mini/CallPilot 150
To connect to the CallPilot Mini/CallPilot 150, you need the IP address of the CallPilot Mini/
CallPilot 150 and a connection to the network that the CallPilot Mini/CallPilot 150 is on.
The default IP address for CallPilot Mini/CallPilot 150 is 192.168.110.10.
If the default IP address is compatible with your network, you can connect the LAN cable to the
Ethernet port on the CallPilot Mini/CallPilot 150 and proceed to
“Running the Quick Install
Wizard” on page 39 .
If the default IP address is not compatible, you must change the IP address before you connect the
CallPilot Mini/CallPilot 150 to the network. You can change the IP address using a serial cable or
an Ethernet crossover cable (direct PC connection).
Changing the IP address using a serial cable
If you are going to change the IP address using a serial cable, you need a:
• serial cable
• VT100-compatible terminal or a computer that has a VT100 compatible terminal emulation
program such as HyperTerminal
Note:
If you are installing a CallPilot Mini system, you must use a shielded Ethernet
cable to connect to the LAN. The shielded cable is required to meet Class B requirements
on the Meridian 1 system. A shielded Ethernet cable is included in the CallPilot Mini box.
If you are installing a CallPilot 150 system, you can use a standard, unshielded Ethernet
cable to connect to the LAN. An Ethernet cable is not included in the CallPilot 150 box.
Note: If you are unsure if the default IP address is compatible, contact your network
administrator.
Note: The serial port is intended for temporary connections only. After you have finished
changing the IP address, remove the serial cable and close the CallPilot Mini/CallPilot 150
door. Failure to remove the serial cable may result in a non-compliant EMC configuration.
Note:
A serial cable is available as a separately available part. For information about
obtaining a serial cable, contact your Nortel Networks supplier.