Nortel 2000, Using Manual

Page: 212 / 405

212 Chapter 3 Using the console interface
208700-B
Figure 77 MultiLink Trunk Utilization screen (2 of 2)
Table 33 describes the MultiLink Trunk Utilization screen fields.
Table 33 MultiLink Trunk Utilization screen fields
Field Description
Trunk Column header for the read-only fields in this screen. The read-only data displayed in
this column indicates the trunk (1 to 6) that corresponds to the switch ports specified
in the Port field.
Traffic Type Allows you to choose the traffic type to be monitored for percent of bandwidth
utilization (see Range).
Default Value Rx and Tx
Range Rx and Tx, Rx, Tx
Unit/Port Lists the trunk member ports that correspond to the trunk specified in the Trunk
column. The (Unit/) extension to the Port column name only appears when the switch
(unit) is part of a stack configuration. It indicates that the ports in this row are
associated with the specified unit number configured in the Unit field.
Last 5 Minutes This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 5 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
MultiLink Trunk Utilization
Trunk Traffic Type Unit/Port Last 5 Minutes Last 30 Minutes Last Hour
----- ------------- --------- -------------- --------------- --------
5 [ Rx and Tx ] 8/22 45.0% 35.0% 50.0%
8/23 55.0% 25.0% 70.0%
6 [ Rx and Tx ] 3/2 65.0% 30.0% 55.0%
[ Rx and Tx ] 1/2 45.0% 50.0% 35.0%
[ Rx and Tx ] 7/2 25.0% 40.0% 50.0%
[ Rx and Tx ] 5/6 75.0% 80.0% 55.0%
Press Ctrl-P to display utilization for trunks 1-4.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.