Nortel 2000, Using Manual

Page: 205 / 405

Chapter 3 Using the console interface 205
Using the Business Policy Switch 2000 Version 1.2
Figure 73 High Speed Flow Control Configuration
Table 30 describes the High Speed Flow Control Configuration screen fields.
Table 30 High Speed Flow Control Configuration Screen Fields
Field Description
Unit Allows you to select the unit number (when stacking is configured) to view or
configure. To view or configure another unit, type its unit number and press
[Enter], or press the spacebar to toggle the unit numbers (the system only
displays a screen for units that are configured with a Gigabit MDA).
Autonegotiation When enabled, the port only advertises support for 1000 Mb/s operation, in
full-duplex mode.
Default Value Enabled
Range Enabled, Disabled
Flow Control Allows you to control traffic and avoid congestion on the Gigabit MDA port. Two
modes are available (see
“Choosing a high speed flow control mode ” for details
about the two modes). The Flow Control field cannot be configured unless you
set the Autonegotiation field value to Disabled.
Default Value Disabled
Range Disabled, Symmetric, Asymmetric
High Speed Flow Control Configuration
Unit: [ 1 ]
Autonegotiation: [ Enabled ]
Flow Control: Disabled
Preferred Phy: [ Right ]
Active Phy: Right
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.