manualshive.com logo in svg

Nortel 2000, Using Manual

The LG 2000 User Manual is an essential guide for operating and troubleshooting your LG 2000 product. Download this manual for free from manualshive.com to ensure you maximize the full potential of your device. This comprehensive manual provides step-by-step instructions and valuable insights for a seamless user experience.

Share
Download
background image

Chapter 3 Using the console interface 181

Using the Business Policy Switch 2000 Version 1.2

 

MAC Address Security Table screens

The MAC Address Security Table screens allow you specify the ports that each 
MAC address is allowed to access. You must also include the MAC addresses of 
any routers that are connected to any secure ports.

There are 16 available MAC Address Security Table screens (

Figure 63

) that you 

can use to create up to 448 MAC address entries (28 per screen). 

Figure 63   MAC Address Security Table screens

➨

Choose MAC Address Security Table from the MAC Address Security 
Configuration Menu to open the MAC Address Security Table screen 
(

Figure 64

).

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 1   More...

Press Ctrl-N to display next screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 1   More...

Press Ctrl-N to display next screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 1   More...

Press Ctrl-N to display next screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 16

Press Ctrl-P to display previous screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

Screen 1

Screen 16

Summary of Contents for 2000






















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2000

Camoplast T4S User Manual preview
T4S
Brand: Camoplast Pages: 60
IFM Electronic efector 250 Installation Instructions Manual preview
efector 250
Brand: IFM Electronic Pages: 16
IFM Electronic Efector 200 Operating Instructions Manual preview
Efector 200
Brand: IFM Electronic Pages: 6
Jetter JX3-BN-CAN Manual preview
JX3-BN-CAN
Brand: Jetter Pages: 4
K&K M5700N Manual preview
M5700N
Brand: K&K Pages: 8
K&K M4700 Manual preview
M4700
Brand: K&K Pages: 20
K&K M3500N Manual preview
M3500N
Brand: K&K Pages: 6
K&K M2500 Manual preview
M2500
Brand: K&K Pages: 3
K&K M1500 Manual preview
M1500
Brand: K&K Pages: 3
Parrot CK3300 Setup Information Manual preview
CK3300
Brand: Parrot Pages: 19
Parrot Minikit+ Quick Start Manual preview
Minikit+
Brand: Parrot Pages: 88
Parrot Minikit+ Information Sheet preview
Minikit+
Brand: Parrot Pages: 2
Parrot CK3100 LCD Specifications preview
CK3100 LCD
Brand: Parrot Pages: 2
Parrot MINIKIT CHIC User Manual preview
MINIKIT CHIC
Brand: Parrot Pages: 11
Parrot CK 3000 Evolution Installation Notes preview
CK 3000 Evolution
Brand: Parrot Pages: 8
Parrot CK 3000 Evolution User Manual preview
CK 3000 Evolution
Brand: Parrot Pages: 106
YUNEEC E45S Quick Start Manual preview
E45S
Brand: YUNEEC Pages: 10
Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5

Brands by name

Popular brands

Load more brands