manualshive.com logo in svg

Nortel 2000, Using Manual

Share
Download
Nortel 2000 Using Manual Download Page 51

51

Using the Business Policy Switch 2000 Version 1.2

 

STG configuration guidelines

This section provides important information on configuring STGs:

•

An STG must be created in the following order:

— Create the STG

— Add the existing VLAN and port memberships

— Enable the STG

•

When you create a VLAN, that VLAN automatically belongs to STG 1, the 
default STG. If you want the VLAN in another STG, you must move the 
VLAN by assigning it to another STG. 

•

You move a newly created VLAN to an existing STG by following this order:

— Create the VLAN

— Delete the VLAN from STG1

— Add the VLAN to an existing STG

•

You cannot delete or move VLAN1 from STG1.

•

VLANs must be contained within a single STG; a VLAN cannot span 
multiple STGs. By confining VLANs within a single STG, you avoid 
problems with spanning tree blocking ports and causing a loss of connectivity 
within the VLAN. When a VLAN spans multiple switches, the VLAN must 
be within the same spanning tree group (have the same STG ID) across all the 
switches.

•

All VLANs in the same shared database (SVL) must be assigned to the same 
STG.

•

All members of a particular MultiLink Trunking (MLT) group must be 
assigned to the same STG; that is, they can belong to one and only one STG. 

•

A port that is not a member of any VLAN cannot be added to any STG. The 
port must be added to a VLAN, and that VLAN added to the desired STG.

•

Tagged ports can belong to more than one STG, but untagged ports can 
belong to only one STG. 

•

When a tagged port belongs to more than one STG, the egress BPDUs are 
tagged to distinguish the BPDUs of one STG from those of another STG. 

Summary of Contents for 2000






















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands