Function
Code
R
Parameter
Description Default
ange
of
8
Cal
◆
:
rity Code
)
will switch the
line to the fax machine after the
ring machine ends its operation.
5 N / A
l Filter
Additional Programming
(refer to page 21,
Secu
1: Turn on Fax Filter
2: Turn on Modem Filter
er
3: Turn on Phone Filt
4: Turn on TAD-to-Fax
5: Turn off all the Call Filter modes
Example:
# * 8 4 *
The
Ultra Switch 100
answe
1.
2.
ge in your answering machine to remind
nswering machine ends its
operation.
4.
Fax Filter overrides TAD-to-Fax. Namely, only Fax Filter
is effective when both Fax Filter and TAD-to-Fax are
switched on.
Note:
More than one Call Filter may be enabled simultaneously.
When the Fax Filter (Modem Filter) is switched on, the
Ultra Switch 100
will disconnect the C/O line
immediately if the CNG tone (reverse modem tone) is
detected.
3. TAD-to-Fax
is useful when the caller cannot enter a tone
code to direct the
Ultra Switch 100
to transfer the call to
the fax machine. In this case, you may pre-record an
outgoing messa
the caller not to hang up the phone if he/she wishes to
send a fax. The
Ultra Switch 100
will route the line to the
fax machine after the a
20
