3. PROGRAMMING
he
Ultra Switch 100
allows you to program a wide range of function
o program the desired function code into the
Ultra Switch 100
, you simply
ote that each function setting must be completed within 6 seconds,
he following is a list of all function codes available for programming and
15
T
parameters so that you can adapt the
Ultra Switch 100
to your operating
environment completely without sacrificing some vital features of the
attached devices or the
Ultra Switch 100
itself.
T
lift the handset of the phone connected to the phone port of the
Ultra Switch
100
, press
#*
followed by the specific function code together with the
required parameter, and finally ends up with
*
to complete function setting.
The
Ultra Switch 100
will respond with three short tones to indicate the
success of function programming. Notice that when
#*
are pressed, the
POWER
indicator on the top of the
Ultra Switch 100
will turn off and you
will hear three short tones from the handset indicating that the
Ultra Switch
100
is ready for function programming. After setting a function parameter,
you may need to program another function parameter. In this case, you just
enter the corresponding function code along with its parameter and terminate
with
*
. The same procedure of function programming can be repeated until
all the desired functions have been programmed. Finally, you may either hang
up the phone or press
*
once more to quit. The
POWER
indicator will
light up again indicating that the
Ultra Switch 100
is back to normal
operation. The
Ultra Switch 100
then works exactly according to the
functions you just programmed.
N
otherwise the
Ultra Switch 100
will respond with a long tone, ignore the code
having been entered and return to the ready state for further function
programming.
T
the detailed explanation associated with each function code.
