◆
Manual Switching Remotely
Fax Access Code after the line is
TAD-to-Fax Switching
Instruct the caller to enter the
answered by the
Ultra Switch 100
. The
Ultra Switch 100
will route
the line to the fax port after it receives the correct code.
1
(DTMF) telephone.
.
The
Ultra Switch
Answer" rings when operating in the
Regular Switch
mode,
answer the call after "Rings to Answer" plus one rings when
operating in the
Caller ID
mode or the
Dis-tinctive Ringing
mode.
2
Note:
.
The remote switching can only be conducted through a tone-dial
100
will answer the call after "Rings to
■
When this TAD-to-Fax mode is activated, the
Ultra Switch 100
will route
the line to the fax port after the answering machine (connected behind the
Ultra Switch 100
) completes its operation ( i.e., answers the line, plays
the pre-recorded outgoing message, and records incoming voice message,
etc. ). Please refer to page 20 to enable this mode.
The TAD-to-Fax switching is useful to facilitate fax transmission from a
pulse-dial fax machine by which Fax Access Code can not be entered to
instruct the
Ultra Switch 100
for fax switching. When this mode is on,
you may record the outgoing message to remind the fax caller to stay on
the line until the fax tone is heard.
8
