Modem Switching by Modem Access Code
1: Type your phone number
ype the letter "R"
odem generates reverse modem tone
2: After the phone number, t
3: Press the Enter key
The calling computer's m
immediately after dialing.
■
There is an alternative for your
Ultra Switch 100 to
route a modem call to
he Modem Access Code can be entered locally or remotely, both
To Enter the Modem Access Code Remotely
struct the caller to follow the steps listed below to access your
:Type your phone number.
10
the modem port. This allows computer connection via the modems that
do not support reverse modem communication. This approach requires
the Modem Access Code to instruct the
Ultra Switch 100
that a computer
communication is requested. The
Ultra Switch 100
, after receiving the
Modem Access Code (default code:
22
, page 17), routes the line to the
modem port through which the calling and the receiving modems are
connected for computer communication.
T
requires the code to be entered after the call is answered by the
Ultra
Switch 100
.
◆
In
computer:
1
