Function
Code
e
lt
Range
Parameter
Description D fau
of
7
and pa
Access Code
and
Modem
mo
3 , 6
and 8
N / A
Declaration of Device Availability
◆
Additional Programming:
(refer
, "
Distinctive Ringing
"
to page 12
ge 17,
Fax
Access Code
)
0: Fax or modem disabled
1: Fax is disabled
2: Modem is disabled
3: Fax and modem enabled
4: Caller ID with ringing
5: Caller ID without ringing
6: Caller ID disabled
7: Distinctive Ringing Mode enabled
8: Distinctive Ringing Mode disabled
Example:
# *
7 2
*
The
dem port of the
Ultra Switch
100
is not being used.
1. The Ultra Switch 100 will disconnect the line
the call attempts to link to a disabled
to disable a device.
l route a call to the
identification tone
tone) associated to
detected.
2.
ng has been enabled, the
Ultra Switch 100 will let the first two rings pass through
r information can be recorded
by th
3.
Some phones do not require to be waken-up with a ring to
record Called ID. In this case, the Caller ID without
ringing should be enabled.
Note:
immediately if
device. However, it is not necessary
In this case, the Ultra Switch 100 wil
port not in use if the access code or
(either CNG tone or reverse modem
that port is
When the Caller ID with ringi
the phone port so that calle
e display.
19
