Operation
A 5-11
Part 331235C
E
2003 Nordson Corporation
Part A: System Overview
Daily Maintenance
WARNING:
Turn off the electrostatic voltage and ground the gun electrode
before performing the following tasks. Failure to observe this warning could
result in a severe shock.
1. Compare the gun’s
A output in kV mode with no parts in front of the
gun with the output and kV setting recorded at initial startup. Significant
differences may mean that the gun electrode assembly or multiplier is
shorted or failed. Refer to the
Troubleshooting
section for more
information.
WARNING:
Check all ground connections thoroughly. Ungrounded
equipment and parts may accumulate a charge that could arc and cause a
fire or explosion. Failure to observe this warning could cause serious injury.
2. Check all ground connections, including part grounds. Ungrounded or
poorly grounded parts affect transfer efficiency, electrostatic wrap, and
the quality of the finish.
3. Check power and gun cable connections.
4. Make sure that the air being supplied is clean and dry.
5. Wipe powder and dust off the control system cabinet with a clean, dry
cloth.
Summary of Contents for Sure Coat
