Nordson Spectrum VT Feed Center, Product Manual

Page: 45 / 105

Operation
4-17
Part 1611362 − 01
E
2018 Nordson Corporation
Complete the Color Change
See Figure 4-17.
1. Load a new box of powder into the Feed Position on the vibratory table.
2. Select the red Transfer Pump icon to fill the hopper with the new powder
color.
3. Once the screen shows the hopper is full, begin spraying the new
powder color.
NOTE: Within 60 seconds, the reclaim transfer pump will automatically
be turned on. It can be turned off, but to begin again, it will have to be
turned on manually.
NOTE: If the timed reclaim-to-waste option was configured, a pop-up
will appear to signify completion.
Figure 4-17 Complete the Color Change