Nordson Spectrum VT Feed Center, Product Manual

Page: 42 / 105

Operation
4-14
Part 1611362 − 01
E 2018 Nordson Corporation
Clean Critical Points on the Feed Center
See Figure 4-14.
NOTE: If Reclaim to Waste timer mode is selected, then the reclaim
(green) hose will not be moved to the hopper until the timer times out and
the operator is notified.
1. Lift the hopper lid.
2. Remove, blow off, and hang the sieve.
3. Remove and blow off the stack sleeve.
4. Blow off all critical points (noted in Figure 4-14).
5. Select the check mark when these steps are completed.
NOTE: Be sure to blow off all visible powder, including the vibratory
table, the inlets on the hopper, and behind the hopper lid.
Figure 4-14 Clean Critical Points on the Feed Center