Nordson Spectrum VT Feed Center, Product Manual

Page: 41 / 105

Operation
4-13
Part 1611362 − 01
E
2018 Nordson Corporation
Blow off the Pick-Up Tube Arm
See Figure 4-12.
The hopper and fresh powder transfer pump will begin to purge.
1. Blow off the pick-up tube arm.
2. Select the check mark when the purge is complete and the box or bin is
removed.
Figure 4-12 Blow off the Pick-Up Tube Arm
Move the Fresh Powder Hose
See Figure 4-13.
1. Move the fresh powder hose (yellow) from the hopper to the waste port.
Both the reclaim (green) and fresh powder (yellow) hoses should be on
the waste ports.
2. Lift the stack sleeve and lock it in place so it is in the Up position.
3. Select the check mark when these steps are completed.
Figure 4-13 Move the Fresh Powder Hose