Nordson Spectrum VT Feed Center, Product Manual

Page: 44 / 105

Operation
4-16
Part 1611362 − 01
E 2018 Nordson Corporation
Clean the Cyclone
See Figure 4-16.
1. Open the cleaning duct slide gate.
2. Blow off the lower section of the cyclone.
3. Blow off the upper section of the cyclone.
4. Swing the lower section of the cyclone down and latch it closed.
5. Swing the transfer pan down and latch it closed.
6. Close the cleaning duct slide gate.
7. Open the booth doors at the entry of the booth.
8. Select the check mark when these steps are completed.
NOTE: The slide gate is located behind the cyclone.
Figure 4-16 Clean the Cyclone