Powder Pilot
™ HD
P/No.7192721_02
Page | 44
Step 5
–
manual cleaning:
This is the last step of the sequence;
the screen below reminds the operator to manually clean cyclone and hopper
Cleaning of the pumps can be activated or stopped by touching the pump symbols on the right side of the
screen. This is visualized by the blue arrows again.
After cleaning, the hoses need to be placed back to their operating positions and the virgin pump can be
used to refill the hopper with the new powder.
When done, the
- button will bring the operator back to the Spectrum
HD control screen
Normal production can start again.
