2
Applicators
P/N 317091G
E
2011 Nordson Corporation
EP11 / EP 12
Residual Risks
In the design of the unit, every measure was taken to protect personnel from
potential danger. However, some residual risks cannot be avoided.
Personnel should be aware of the following:
S
Risk of burns on the hot applicator: from hot material and when making
adjustments
S
Material fumes can be hazardous. Avoid inhalation.
Note on Manual
S
Because the unit is continuously being modified and improved, there are
several models of the applicator. Thus illustrations in this manual may
deviate from the actual design
S
The illustrations show only the essential components of the applicator.
Refer to the technical drawing for additional components and details.
Definition of Term(s)
Applicator
The term
application head
is also used in Nordson literature.
Melter
General term for tank melters and bulk melters.
Control Module
The term
module
is also used in Nordson literature.
Series Overview
Explanation of Type Designation
The table shows the various models of the application heads in the series
EP 11
and
EP 12
.
EP 11 / EP 11 N
One suction stem control module per application zone
EP 12 V
standard model
Two suction stem control modules per application zone, V design
EP 12 L
special model
Two suction stem control modules per application zone, L design
EP 12 RV
special model
Two suction stem control modules per application zone, V design,
includes recirculation control module
