Applicators
31
P/N 317091G
E
2011 Nordson Corporation
EP11 / EP 12
Disassembling and Cleaning Filter Cartridge
Disassemble the filter cartridge only when hot. If the filter cartridge is not
disassembled immediately after removal, it must be heated (e.g. with an air
heater).
WARNING:
Hot! Risk of burns. Wear heat‐protective gloves.
NOTE:
Only use a cleaning agent recommended by the material supplier.
Observe the Material Safety Data Sheet for the cleaning agent.
NOTE:
Always replace the filter screen (4).
1. Disassemble the filter cartridge when hot.
2. Replace the filter screen.
3. Clean all other parts.
4. Check all O‐rings; replace if necessary.
5. Apply high temperature grease to all threads and O‐rings. Refer to
Processing Materials
for information on the high-temperature
grease.
6. Properly dispose of cleaning agent according to local regulations.
1
2
3
4
5
3
1
2
3
4
6
2
8
4
3
3
7
Fig. 18
1 Center tapped hole
2 Filter
screw
3 O‐ring
4 Filter
screen
5 Screw
plug
6 Filter
sheath
7 Air relief valve
8 Nut
