Nordson Encore LT Automatic, Customer Product Manual

Page: 49 / 71

Parts
6-1
Part 1604858-01
E
2013 Nordson Corporation
Section 6
Parts
Introduction
To order parts, call the Nordson Industrial Coating Systems Customer
Support Center at (800) 433-9319 or contact your local Nordson
representative.
This section covers parts for the dual and multi-gun controllers, powder and
air tubing, and options. Refer to the following manuals for additional
information and optional equipment.
Encore LT Automatic System Operator Card: 1108326
Encore Automatic Powder Spray Guns: 1098185
Encore Ion Collector Kits:
1098186
These manuals can be downloaded from:
http://emanuals.nordson.com/finishing/
WARNING: Shut off the controller and disconnect the power cord or
disconnect and lock out power at a breaker or disconnect ahead of the
controller before opening the controller enclosures. Failure to observe this
warning could result in a severe electrical shock and personal injury.
CAUTION: Electrostatic sensitive device. When handling electronic
devices, wear a grounding wrist strap and use proper grounding techniques
to avoid damage.
Controller Part Numbers
Use these part numbers to order controllers. For Axis controller parts, refer
to the Axis controller manual.
Part Description Note
1107870 CONTROLLER ASSEMBLY, 1 gun, Encore automatic, packaged
1107702 CONTROLLER ASSEMBLY, 2 gun, Encore automatic, packaged
1107792 CONTROLLER, 4 gun, Encore automatic
1107794 CONTROLLER, 6 gun, Encore automatic
1107795 CONTROLLER, 8 gun, Encore automatic
1108542 CONTROLLER, 4 gun with Axis controller, Encore automatic
1108543 CONTROLLER, 6 gun with Axis controller, Encore automatic
1108544 CONTROLLER, 8 gun with Axis controller, Encore automatic