Nordson Encore LT Automatic, Customer Product Manual

Page: 16 / 71

Description
2-4
Part 1604858-01
E 2013 Nordson Corporation
Specifications
Model Input Rating Output Rating
ENCORE Applicator +/ − 19 VAC, 1 A 100 kV, 100
μ
A
Single Gun Controller 100 − 250 VAC, 50/60 Hz,1 phase
2.5 A, 100 VA max
N/A
Dual Gun Controller 100 − 250 VAC, 50/60 Hz,1 phase
2.5 A, 125 VA max
N/A
Multi-Gun Controller 100 − 250 VAC, 50/60 Hz,1 phase
6.3 A, 275 VA max
N/A
S
Input Air: 4.0 − 7.6 bar (58 − 110 psi), <5 μ particulates, dew point <10 _ C
(50 _ F)
S
Max Relative Humidity: 95% non-Condensing
S
Ambient Temperature Rating (Encore System): +15 to +40 _ C
(59 − 104 _ F)
S
Hazardous Location Rating for Applicator: Zone 21 or Class II, Division 1
S
Hazardous Location Rating for Controllers (without Axis Controllers):
Zone 22 or Class II, Division 2
S
Dust Ingress Protection: IP6X
Special Conditions for Safe Use
To meet ATEX requirements for the European Union:
S
The Encore LT Controllers shall be used over the ambient temperature
range of +15
_ C to +40 _ C (59 − 104 _ F) with the Encore Powder
Electrostatic Automatic Applicators.
S
The equipment must be installed and used in accordance with Standard
EN50177.
S
The Encore LT Automatic Controller can be installed in a non-hazardous
area or in a hazardous area defined as a Zone 22.
S
The Encore LT Automatic Controller with Axis Controller must be
installed in a non-hazardous area.
S
Caution should be taken where cleaning plastic surfaces of the Encore
LT Controller. There is a potential for static electricity build up on these
components.