15
www.nordsonefd.com [email protected]
800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Safety Enclosure for Automated Dispensing Systems
Install the Dispensing System and Reinstall the Panels
1.
Install the dispensing system. Refer to the
dispensing component manuals for complete
installation instructions.
NOTE:
A power strip is provided on the front
top of the enclosure. This location is ideal for a
dispense valve controller.
Power strip on
top of enclosure
2.
Reinstall the back clear panels and the right-side clear panel using the screws removed previously.
3.
a. Open the electrical box on the back of the
safety enclosure.
b. Set the 24V voltage supply switch to the
correct setting for your installation.
AC supply
voltage switch
The automated dispensing system is now fully
installed in the safety enclosure.
Continue to the next procedures to connect
inputs / outputs and to power on the complete
system for the first time.
Example of a fully installed system
(EV Series system shown)
Installation (continued)
