Nordmann AT4 13064, Mounting Instructions

Page: 17 / 68

17
3.6 Options
Nordmann AT4...
522
524
532
534
822
824
832
834
1532
1534
2362
2364
3262
3264
4564 4662 6462
6464
6564 9064 13064
Remote operating and fault indication
PCB with relay contacts for the connection
of remote displays for “Operation”, “Steam”,
“Fault” and “Service”.
1xRFI
Overpressure set
Kit for mounting the water cup to the unit
cover when operating the steam humidi fiers
in systems with a duct air pressure of up to
10 kPa.
1xOPS 2xOPS 1xOPS 2xOPS
Steam hose connector with
condensate trap
1xCT.. 2xCT.. 4xCT..
Cable glands 1xCG 2xCG 1xCG 2xCG
Internal control voltage supply
(for mains supply with neutral lead)
1xS-CVI 1xM-CVI 1xL-CVI
Transformer 400V/230V for internal
control voltage supply
(for mains supply without neutral lead)
Trafo
@-Link AT4
Gateway to connect the Nordmann AT4 to a
building management system. Two versions
are available: BACnet/IP or LonWorks.
Configuration according to separate documentation
Nordmann AT4... (400 V/3~/50...60 Hz)
534 834 1534 2364 3264 4564 --- 6464 6564 9064 13064
Steam cylinder for low water conductivity
from 80 to 125 µS/cm
1x
534A-L
1x
834A-L
1x
1534A-L
1x
2364A-L
1x
3264A-L
1x
4564A-L
--- 2x
3264A-L
--- 2x
4564A-L
---