12
10
117
100
108
57
10. Identify the Upper and Lower Bracket Covers
(57, 100), orient them as shown, and press them
together around the Console Bracket (108).
Attach the Upper and Lower Bracket Covers
(57, 100) to the Console Bracket (108) with two
M4 x 20mm Screws (117).
11.
IMPORTANT: If you purchased the optional
iFit module, insert the iFit module into the iFit
port on the Console (4) before you attach the
Tablet Holder (101). After the exercise bike is
assembled, follow the instructions included
with the iFit module.
Attach the Tablet Holder (101) to the Console (4)
with four #8 x 12mm Screws (109);
start all the
Screws, and then tighten them.
11
12
41
10
67
12. Attach the Seat Frame (10) to the Seat Carriage
(41) with four M8 x 16mm Screws (67);
start all
the Screws, and then tighten them.
4
101
109
iFit
Port
Summary of Contents for ELITE 7.4
Page 4: ...4 ...
