13
13
56
25
118
102
13. Identify the Right Accessory Tray (102).
Attach the Right Accessory Tray (102) to the
Seat Handlebar (25) with two M4 x 19mm Flange
Screws (118).
Repeat this step to attach the Left Accessory
Tray (56).
14
14.
Tip: Avoid damaging the Control/Pulse Wire
(107) during this step.
Attach the Seat Handlebar (25) to the Seat
Frame (10) with four M8 x 40mm Bolts (105) and
four M8 Locknuts (106);
start all the Locknuts,
and then tighten them.
See the inset drawing, which shows the left
side of the exercise bike.
Plug the Control/
Pulse Wire (107) fully into the Frame Pulse
Receptacle (42) on the left side of the exercise
bike.
88
9
15
15. Attach the Seat (9) to the Seat Frame (10)
with four M6 x 38mm Screws (75) and four M6
Washers (88);
start all the Screws, and then
tighten them.
Note: Only two Screws and two
Washers are shown.
25
105
106
10
107
107
42
10
75
Summary of Contents for ELITE 7.4
Page 4: ...4 ...
