Nordic Radio Ping 6, User Manual

Page: 14 / 16

Config 2: ID
You can define an identification code for your
Ping™ 6. The code can contain both numbers
and letters, and it’s case sensitive. Default value
for ID is: Ping.
Alarm settings
Config 15: Max allowed movement in anchor
mode
You can define a max. distance that Ping™ 6 is
allowed to move from the stored position while
in the anchor mode. Once the limit is exceeded,
a movement alarm is triggered. Allowed
distance can be set to: 0035 ... 9999 (meters).
Default value is 0250 (meters).
Messaging settings
You can define if you want to enable !IND
messages.
Config 23-24: Destination numbers
You can define five destination numbers into the
fields 23: Alarm number 1.. 27: Alarm number
5. Alarm messages, including battery alarm
messages are sent to these numbers.
Write the phone numbers with international
code.
Voice call settings
Voice calls can be initiated by Ping™ 6 under
specific circumstances. You can define settings
for terminating, auto answering voice calls,
and allowed numbers for outgoing voice calls.
Config 9: Voice call auto answer
In this field, you can define if you want Ping™ 6
to answer automatically to incoming voice
calls. Default value is NO. If you wish set the
automatic answer on, type YES.
Config 17: !IND messages (YES/NO)
You can define, whether !IND messages can
be sent or not. !IND messages are sent when
the anchor alarm is activated by pressing the
anchor button. Default value for !IND messages
is NO. If you wish to enable sending !!IND
messages, change the setting into YES.