background image

• 

This tracking device is designed for use on the E-GSM900/ DCS 1800/ PCS 1900 MHZ Tri Band networks. You can use the 

device in all countries where the GSM network operators have a roaming contract with your network operator. 

• 

The device also includes integrated high-performance 12-channel GPS receiver. The unique combination of GPS and GSM 

equipment in this device enables features like tracking and location requests as well as emergency calls and messages. In 

order to function properly, some of these features may require third-party services. Nordic Radio is not responsible for such 

services, their existence, functionality or compatibility with Nordic Radio products.

• 

Information in this User´s manual is subject to change without notice. Nordic Radio reserves the right to change or improve 

their products and to make changes in the content without obligation to notify any person or organization of such changes 

or improvements. Nordic Radio is not responsible for any loss of data, income or any consequential damage whatsoever 

caused. 

• 

Some of the features described in this guide may be optional and intended to be purchased separately. For details, please 

contact your dealer. For more information, details and descriptions, including assortment of chargers and accessories, 

please visit the web site: www.benefon.com. 

• 

Nordic Radio warrants its products to be free of defects in material or workmanship when leaving the factory. A warranty 

certificate with the date of purchase is enclosed in the delivery. For details, see the warranty certificate. Hereby, Benefon 

Oyj declares that this tracking device, type TP00310/TP00320 is in compliance with the essential requirements and other 

relevant provisions of Directive 1999/5/EC.

• 

FCC warning statements: This device complies with part 15 of the FCC Rules. Operation is subject to following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. Changes or modifications not expressly approved by the party 

responsible for compliance would void the user’s authority to operate the equipment.

• 

Ping 6 is a registered trademark of Nordic Radio.

Note:

 Correct disposal of this product: The 

tracking device should not be disposed with 

household or other commercial wastes. 

Remove the battery from the phone 

and dispose it according to local battery 

recycling laws.

0413

Made in Finland 

for Nordic Radio 

www.gsmlarm.se

Summary of Contents for Ping 6

















Reviews: