Nordic Radio Ping 6 User Manual Download Page 4

Page: 4 / 16

Ping™ 6

Ping™ 6 is an auxiliary device for locating and

tracking different targets. Place Ping™ 6 on

your desired target, e.g car, and you can easily

monitor it’s location.
Ping™ 6 can send you continuously updated

position messages. With these messages, you

can easily track the movements of Ping™ 6.

You can also create an anchor that alarms you

if your Ping™ 6 is moved outside your defined

area.
You can call or send messages to Ping™ 6 to

get an updated position at any time. Additionally,

by making a voice call, you can also listen to

what happens nearby the device.
Ping™ 6 is a GSM-device with in-built GPS-

positioning and support for MPTP commands.

It can be used with any corresponding Benefon

GPS-GSM phones and back-end devices that

also support MPTP commands.

Getting started

Inserting SIM-card

Summary of Contents for Ping 6

















Search results

Summary of Contents for Ping 6

Reviews:

Related manuals for Ping 6

Brands by name

Popular brands

Nordic Radio Ping 6, User Manual

Search results

Summary of Contents for Ping 6

Reviews:

Related manuals for Ping 6

Brands by name

Popular brands