Nordic Radio Ping 6, User Manual

Page: 5 / 16

1. Remove the back cover and battery as
described in on page 6.
2. Slide the SIM card holder to the right. Lift the
holder into an upright position.
3. Insert SIM card into the hole. Check that the
cut corner is placed at the bottom left corner.
4. Close the holder. Slide the holder back to
the left until it locks.
Inserting battery and back cover
1. Place the bottom tabs of the battery into the
small hollows at the bottom of the device.
2. Push the battery towards the device until
it locks into place. Ensure that the battery
release catch is positioned upwards.
3. Place the back cover towards the device,
bottom first.
4. Press the cover to the device until it locks in
place at the top.
5. Fasten the back cover with the fastening
screws. Longer screws for the front and
shorter for the back side.
Note that the battery will reach its full capacity
only after two or three complete charges. For
more info, see Charging the battery on page 9.