Nordic Radio Ping 6, User Manual

Page: 8 / 16

Charging the battery
1. Plug the charger cable in the bottom
connector of the device (round hole on the
lefthand side).
2. Plug the charger into the mains outlet.
3. Charging starts automatically. As a sign of
charging, all three LED indicators are turned
on for a couple of seconds. After that the
GSM LED blinks in sequences, 2 blinks
in a sequence at first and then 4 blinks
in a sequence. When the battery is fully
charged, the GSM LED stays constantly on
until the charger is disconnected. If there
is an interruption or failure in charging, the
status LED is turned off. Unplugging and
replugging the cable displays the status of
charging. If the battery is full, the status LED
blinks 4 times, after which it’s turned off.
4. You can operate Ping™ 6 during charging.
However, if the battery is totally empty, it
might take several minutes before the device
can be used. If you turn the Locator on while
charging, the LEDs indicate events related
to the ongoing mode, instead of showing the
charging status.