Nordic Radio Ping 6, User Manual

Page: 7 / 16

Turning Ping™ 6 on and off
You can turn Ping™ 6 on by pressing the power
on/off button. As a sign of starting-up, all three
LED indicators turn on for a couple of seconds.
After that the status LED continues blinking for
about 20 seconds. To turn the device off, press
the power on/off button again.
Status LEDs
When Ping™ 6 is turned on, LED indicators
express the status of the device as follows:
You can ask the battery status by pressing the
power on/off button. The status LED indicates
battery level as follows:
When battery is low, Ping™ 6 also sends battery
alarm message to your defined destination
numbers. For more information, see Config 23-
27: Destination numbers on page 14.
. Blinks/
sequence Battery status
1 Low (0-20%)
2 Fairly low (21-40%)
3 Fairly full (41-60%)
4 Almost full (61-80%)
Continuously on Full (81-100%)
LED Indicator light
GSM LED Continuously on, when data call is on,
or a SMS message is being sent or
received.
GSM LED 1 blink/sequence when having a
network.
GPS LED 1 blink/sequence, if the GPS has a
valid position that is not older than 5
minutes.
GPS LED Continuously off, if previous position is
older than 5 minutes and a new fix is
not available.