NORDFOREST 46-113, Operating Manual

Page: 50 / 240

50 46-113, 46-114 | 11.2018
Assembly
8 t wood splitter
Fitting actuation arm
Before first commissioning of the wood splitter, fasten the actuation
arms.
›
Guide the tube of the actuation arm into the elongated hole in the
actuation rocker. When doing so, the protective plates must face
inwards.
›
Guide the pins supplied through the bracket plate of the wood
splitter and the actuation arm, such that the pin forms the axis of
rotation.
›
Secure the pin with the split pin provided. To do so, insert the split
pin in the hole in the pin and bend the split pin to prevent it falling
out again.
Electrical connection
Nordforest 8 t wood splitter, 230 V
The Nordforest 8 t wood splitter has a 230
-
V power connection. The
cable cross section must be at least 2.5 mm² (cable designation 3x 2.5).
›
Connect the mains power cable to the switch/connector
combination.
Nordforest 8 t wood splitter
WARNING
Danger due to incorrect rotational direction of the motor!
The hydraulic pump may be damaged.
›
Before commissioning, check the direction of rotation of the
motor.
Fig. 3: Axis of rotation
of the actuation arm
Fig. 4: Split pin