Nordco TRIPP HD, Operation Manual

Page: 29 / 82

GENERAL MACHINE SPECIFICATIONS
MAR 2016 49457610 TRIPP HD RevB 4-3
* Items or capacities may vary according to options on your machine.
** Approximate weight. Actual weight may vary according to options on your machine. Actual weight of
your machine is as stenciled.
All rights reserved. In view of the constant improvements to our equipment, the specification data and
other technical information included in this manual are subject to change. No part of this manual may be
reproduced in any form or by any means without our written permission.
PNEUMATIC SYSTEM Engine Mounted Compressor:
Unloading Valve -----------------
Relief Valve---------
13 cfm @120 psi
100 psi
150 psi
Tanks 2 @ 7 gallons each
Air Dryer CR Brakemaster Turbo 2000, with
Heater
ELECTRICAL SYSTEM Battery 24 VDC
Dual 12 VDC batteries
1150 Cold Cranking Amps
Ground Negative
Alternator 70 Ampere
AXLE DRIVE SYSTEM Drive Type Dual Axle Chain Drive
Propulsion Motor Type Hydraulic
BRAKES Type Pneumatically Applied (Air)
Style Four Wheel Cobra-Style
CATEGORY SPECIFICATION VALUE