Nordcap 402729447, Installation And Operating Manual

Page: 54 / 65

• Warranty will be applicable where the customer has used only genuine spare parts and
has performed maintenance in accordance with Electrolux Professional user and
maintenance requirements.
• Electrolux Professional strongly recommends to use Electrolux Professional approved
cleaning agents, rinse and descaling agents to obtain better results and maintain
product efficiency over time.
The Electrolux Professional warranty does not cover damages and inefficiencies deriving
from external causes beyond the manufacturer’s responsibilities, such as:
• Insufficient and abnormal capacity of the electrical, hydraulic and gas systems, irregular
supply voltage, impurities contained in the gas or water supply that does not comply with
the technical requirements for each machine, insufficient extraction systems,
customer’s negligence and misuse;
• Deterioration caused by action of unsuitable detergents, additives or cleaning means;
• Non-compliance with the use and care instructions detailed in this manual;
• Tampering, modifications and repairs carried out by third parties not entrusted in writing
by Electrolux Professional;
• Use of non-original components (e.g.: consumables, wear and tear, or spare parts);
• Modification of safety systems;
• Poor maintenance and misuse;
• Warranty does not include scheduled planned maintenance activities, or the supply of
cleaning agents unless specifically covered within any local agreement, subject to local
terms and conditions.
A.11 Machine disposal
• Dismantling operations must be carried out by specialised personnel.
• Work on the electrical equipment must only be carried out by specialised personnel, with
the power supply disconnected.
• Dismantling operations of appliances which use flammable insulation blowing gases
must be carried out by specialised personnel.
• Dismantling operations of appliances which use R– 744 (with a refrigeration system
under high pressure) must be carried out by specialised personnel.
• Make the appliance unusable by removing the power cable and any compartment
closing devices, to prevent the possibility of someone becoming trapped inside.
B APPLIANCE AND MANUFACTURER'S IDENTIFICATION DATA
A reproduction of the marking or dataplate on the machine is
given below.
The dataplate gives the product identification and technical
data.
The meaning of the various information given on it is listed
below:
F.Mod. factory description of product
Comm.Model commercial description
V400TNHC certification group
PNC production number code
Ser.Nr. serial number
V power supply voltage
Hz power supply frequency
kW max. power input
Cyclopentane expanding gas used in insulation
Total Current current absorbed
Defrost Power defrost power
Evaporation Heater El. heating element power
Lighting
inside light power
Class climatic class
GWP global warming potential
CO2 eq quantity of greenhouse gases
Refrigerant type of refrigerant gas
Cap. nominal capacity
IPX1 dust and water protection rating
Total Current xx A Volt xxxV xxxHz
Ser.Nr. xxxxxxxx Cyclopentane
Comm.Model xxxxxxxx
9VTX xxxxxxxx
xxx kW
F.Mod.
PNC
W Tot.
Classe / Class x
Refrigerante / Refrigerant xxxxx xxx kg
Cap. xxx
Potenza Sbrinamento / Defrost Power x kW
x kW
x W
Resistenza Evaporazione / Evaporation Heater El.
Illuminazione / Lighting
IPX1
Electrolux Professional SPA - Viale Treviso, 15 - 33170 Pordenone (Italy)
2017
V400TNHC
GWP xxxx CO2-eq xxx t
21