norbar 130517, Operator'S Manual

Page: 3 / 32

1
CONTENTS
Part Numbers Covered by This Manual 2
Important Safety Instructions 2
Specifications 3
Head Type 3
Display 3
Sealed Button Pad 3
Functions 4
Accuracy 4
Dimensions: Length / Weight 4
Pre-set Range 4
User Instructions 5
Basic Functions (Quick Start) 5
Progress Lights 5
Wrench Power on Sequence 5
Torque Mode 6
Angle Mode 7
Mode Cycle Count 7
Torque and Angle Mode Cycle Counting 7
Main Menu 7
Setting Head Length 8
Use of Negative Offsets 9
Viewing Stored Torque and Angle Data 10
Deleting Stored Torque and Angle Data 10
Viewing and Clearing Wrench Cycle Counter 11
Language 11
Target Pre-sets (PSET) 12
Adding a Torque Pre-set 13
Adding an Angle Pre-set 13
Editing a Pre-set 14
Deleting a Pre-set 15
Settings Menu 16
Accessing Settings Menu 16
Show Info 16
Setting Sleep Time 17
Setting LCD Contrast 18
Key Beep Setup 19
Auto Backlight Setup 19
Toggle Backlight Setup 20
Vibrator Configuration 20
Battery Type Selection 21
Configuration Menu 22
Accessing Configuration Menu 22
Mode Setup 22
Enable/Disable Torque THEN Angle Mode 23
Torque THEN Angle Mode 23
Delete all Pre-sets 24
Calibration 24
Setting Date and Time 24
Setting Calibration Interval 25
Troubleshooting 27
Use of Adaptors, Extensions and Universals 28
Calibration 28
Maintenance / Service 28
Battery Replacement
28
Memory Indicators 29