11
Viewing and Clearing Wrench Cycle Counter
Each time torque or angle target is reached, wrench cycle counter is increased. Maximum cycle count is
999999.
1. From target torque or angle screen, press and hold
ENTER
button
for 3 seconds.
2. Highlight
CYCLE COUNT
menu selection using
UP
/DOWN
buttons.
3. Press
ENTER
button
to display CYCLES screen.
4. To exit CYCLE COUNT screen without clearing count, press
ENTER
button while
EXIT
menu
selection is highlighted.
5. To reset wrench cycle count to 0, highlight
CLEAR
menu selection then press
ENTER
button.
6.
EXIT
menu selection is automatically highlighted after count is cleared. Press
ENTER
button to return
to main menu.
Language
1. From target torque or angle screen, press and hold
ENTER
button
for 3 seconds.
2. Highlight
LANGUAGE
menu selection using
UP
/DOWN
buttons.
3. Press
ENTER
button
to display LANGUAGE selection screen.
4. Highlight desired language using
UP
/DOWN
buttons and press
ENTER
button.
5. Decimal Mark selection menu is displayed. Decimal separator can be a comma or decimal point. Use
UP
/DOWN
buttons to select decimal separator then press the
ENTER
button.
