24
Delete All Pre-sets
Delete Pre-sets function allows user to delete all pre-sets at once.
1. From Configure menu, use
UP
/DOWN
buttons to highlight
DELETE PRE-SETS
selection then
press
ENTER
button.
2. Delete Pre-sets confirmation screen is displayed.
3. Use
UP
/DOWN
buttons to select YES or NO selection.
4. Press
ENTER
button to accept selection and exit to Configure menu.
NOTE:
If Delete Pre-sets is selected without a Pre-set configured, following screen is displayed:
Calibration
Calibration menu is password protected - default factory setting 91748. Contact your
local Norbar Repair Centre regarding Calibration menu.
Setting Date and Time
Set Date/Time function allows user to set real-time-clock date and time for time stamping data records,
recording last calibration date and notifying user of an expired calibration interval.
NOTE:
When date and time is set for first time, In-Service date is also set and is used for
calculating initial calibration interval (see "Setting Calibration Interval" in Configuration
Section).
1. From Configure menu, use
UP
/DOWN
buttons to highlight
SET DATE/TIME
selection then press
ENTER
button.
2. SET DATE screen is displayed with year highlighted.
3. Use
UP
/DOWN
buttons to set year then press
ENTER
button to highlight month.
4. Use
UP
/DOWN
buttons to set month then press
ENTER
button to highlight day.
5. Use
UP
/DOWN
buttons to set day then press
ENTER
button.
6. SET TIME screen is displayed with Hour highlighted.
