8
NookBox
Installation Guide
Repeater
Recommendations
It is strongly suggested to keep a distance between each repeater and/or Main Control Panel to avoid cross signaling.
If a particular device is within an acceptable range for Control Panel to receive its transmission signal, it is strongly recommended
to learn the device into the Control Panel directly instead of into the Repeater.
Multiple Repeaters
If multiple repeaters are used, please follow the guideline below for the most optimum performance:
1.
If multiple repeaters are used to form a transmission relay (e.g. C to B to A to Control Panel), the repeater that is furthest away
from the Control Panel must be learnt into repeater(s) between the furthest repeater and the Control Panel (to form a transmission relay).
Example:
Repeater C must be learnt into Repeater B. Do not learn Repeater B into Repeater C.
Repeater B must be learnt into Repeater A. Do not learn Repeater A into Repeater B.
Repeater A must be learnt into the Control Panel.
<NOTE>
•
Please do not cross-learn the Repeaters.
2.
All repeaters will have to be learnt into the Control Panel.
From the example above:
Repeaters A, B and C are all learnt into the Control Panel individually.
